VeriFone MX 880 Installation Manual page 24

CAUTION
18
MX 800 S I
ERIES NSTALLATION
Figure 15 Sample Multiport Cable: Front and Rear
Improper installation or removal of the terminal connector may permanently
damage the MX 800 Series terminal.
The following precautions must be taken with multiport cables:
•
Do not force the terminal connector into place.
•
Always make sure that all of the pins are lined up in correct parallel fashion
before applying light pressure to snap the terminal connector into place.
•
Do not attempt to remove the terminal connector by pulling directly on the
cable. Instead, firmly grasp the sides of the terminal connector with thumb
and forefinger, then pull out at the same angle the connector on the
terminal is facing.
•
Disconnecting the power source during transaction processing may cause
loss of transaction data.
G
UIDE