Connecting To A Host Pc; Connecting To The Ethernet Lan; Connecting To Usb Host Or Hub - VeriFone MX 915 Installation Manual

MX 900 Series Installation Guide

Connecting to a Host PC

To connect t he MX 900 Series t erminal t o a development PC, which shows a USB
connect ion wit h t he 23741-02-R mult iport cable. Not e t hat USB drivers are
required t o support t his conf igurat ion.

Connecting to the Ethernet LAN

To connect t he MX 900 Series t erminal t o an Et hernet LAN t hrough t he Et hernet
port using a st andard Et hernet cable, insert t he LAN cable f rom t he LAN rout er
or hub int o t he Et hernet port on t he mult iport cable.

Connecting to USB Host or Hub

Connect ing t o a USB host or hub requires VeriFone USB cable (P/ N 23741-02-R).
To connect t o a USB host or hub:
1. Insert t he mult iport cable plug int o t he bot t om socket on t he t erminal,
2. Plug t he USB connect or of t he mult iport cable int o t he USB host or hub.
March 1, 2012
secure wit h t he t ie-down st rap, and rout e t he cable t hrough t he slot s t o
t he desired exit side.
21