Operating The Base On The Pabx - Gigaset E500 Manual

Operating the base on
the PABX
The following settings are only nec-
essary if your PABX requires them;
see the PABX user guide.
Changing the dialling mode
¤ P#Q5#11
§Menu§
¤ Enter digit for the dialling mode:
Q = tone dialling (DTMF);
1 = pulse dialling (PD) ¤
Switching temporarily to tone
dialling (DTMF)
If your PABX still operates with pulse
dialling (PD), but you need tone dial-
ling for a connection (e.g., to listen
to the network mailbox), you must
switch to tone dialling for the call.
Prerequisite: You are conducting a
call or have already dialled an exter-
nal number.
¤ Press the star key P.
Tone dialling is now activated for
this call only.
Setting recall
§Menu§
¤ Enter digits for recall:
Q = 80 ms; 1 = 100 ms;
2 = 120 ms; I = 400 ms;
4 = 250 ms; 5 = 300 ms;
L = 600 ms; M = 800 ms ¤
Changing the pause after line
seizure
You can set the length of the pause
inserted between pressing the talk
§OK§
key c and sending the phone
.
number.
§Menu§
¤ Enter digit for the current pause
length:
1 = 1 second
2 = 3 seconds
I = 7 seconds ¤
Changing the pause after recall key
§Menu§
¤ Enter digit for the current pause
length:
1 = 800 ms; 2 = 1600 ms;
I = 3200 ms ¤

Operating the base on the PABX

¤ P#Q5#12
¤ P#Q5#1O
§OK§
¤ P#Q5#14
§OK§
§OK§
.
.
.
51