Using The Handset As An Alarm Clock; Using Multiple Handsets; Registering Handsets - Gigaset E500 Manual

Using the handset as an alarm clock

Using the handset as an
alarm clock
Activating/deactivating the alarm
clock
Requirement:
The time is set (¢ page 19).
¤ q Alarm clock ¤
§Menu§
¤ q Activation ¤
After you activate the alarm clock,
the menu for setting the wakeup
time opens automatically.
Setting the wakeup time
¤ q Alarm clock ¤
§Menu§
¤ q Wake-up Time ¤
¤ Enter wakeup time ¤
If the alarm clock is activated, you
will see the Ñ icon in the display and
the wakeup time after it.
Ð
10:47
Ñ
07:30
Redial Menu
When the alarm clock rings...
Press the display key
to deactivate the alarm clock for
24 hours.
If you do not press any key, the alarm
clock switches off after one minute.
44
§OK§
§OK§
(³= on)
§OK§
§OK§
§OK§
U
§Off§
or any key
Using multiple
handsets

Registering handsets

You can register up to four handsets
on the base.
Registering a Gigaset handset
manually on the Gigaset E500
You must register the handset man-
ually on both the handset (1) and
the base (2).
After it has registered, the handset
returns to idle status. The internal
number of the handset appears in
the display, e.g., INT 1.
The registration process is cancelled
after 60 seconds. If the handset has
not registered within this time,
repeat the process.
1) On the handset
¤ q Settings ¤
Menu§
¤ q Registering ¤
¤ q Register Handset ¤
¤ Enter the base system PIN
(default setting: 0000) ¤
2) On the base
¤ Within 60 seconds, press and
hold the registration/paging key
on the base (¢ page 3) for
approx. 3 seconds.
§OK§
§OK§
§OK§
§OK§