Gigaset E500 Manual page 48

Handset settings
Setting the ringer melody
Set different ringer melodies for
external calls, internal calls and the
alarm clock.
For external calls you can also spec-
ify that your phone should not ring
at certain times or if a call is from an
unknown caller.
For internal calls and the alarm
clock
¤ q Settings ¤
§§Menu§
¤ q Audio/Visual Signals ¤
¤ q Ringtones ¤
¤ q Internal Calls / Alarm Clock
¤ q (Select melody)
¤
§OK§
¤
§OK§
(³= selected)
For external calls:
¤ q Settings ¤
§§Menu§
¤ q Audio/Visual Signals ¤
¤ q Ringtones ¤
¤ q External Calls ¤
q can be used for the following:
Melody ¤
§OK§
You can set the ringer melody as
described above.
Time Control ¤
§OK§
You can specify a time period
when you do not want the tele-
phone to signal external calls e.g.,
during the night.
Switch q Activation on or off
§OK§
by pressing
q Settings ¤
Starting Time: /Ending Time:
Enter each time as a 4-digit
number and press
48
§OK§
§OK§
§OK§
§OK§
§OK§
§OK§
§OK§
(³= activated).
§OK§
§OK§
.
Anon. Calls Silent ¤
You can set your handset so that it
doesn't ring for calls where
Calling Line Identification has
been withheld. The call will only
be signalled on the display.
Switch the Anon. Calls Silent
function on or off by pressing
(³= activated).
Activating/deactivating the
ringer
You can:
u Permanently deactivate the
ringer in idle status or when
receiving a call
u Deactivate the ringer for the cur-
rent call only.
The ringer cannot be re-activated
while a call is in progress.
Deactivating the ringer
permanently
P
Press and hold the star
key.
The Ú icon appears in the display.
Reactivating the ringer
P
Press and hold the star
key.
Deactivating the ringer for the
current call
§Silence§
Press the display key.
§OK§
§OK§