Unsuitable Conditions; Installing The Srx Controller In A Computer For Controlling The Projector; Operating Environment - Sony SRX-T423 Operating Instructions Manual

Very dusty

Unsuitable Conditions

Do not use the projector under the following conditions.
Laying the unit on its side or upside down
Tilting the unit to the right or left
Avoid tilting the projector more than ± 10 degrees. Doing
so may cause color shading or shorten the lamp life
excessively.
Blocking the ventilation holes
Avoid using a thick-piled carpet or anything that covers
the ventilation holes (exhaust/intake). Otherwise, internal
heat may build up.
For the locations of the ventilation holes (exhaust/intake),
see "Location and Function of Controls" on page 43.
48

Installing the SRX Controller in a Computer for Controlling the Projector

Installing the SRX
Controller in a Computer
for Controlling the
Projector
If you install the SRX Controller in a computer, you can
control the projector from the computer.
If a previous version of SRX Controller is already installed
on the computer, uninstall the previous version
beforehand.

Operating Environment

A computer that meets the following conditions is required
to operate SRX Controller.
Operating system (OS):
Windows Vista Business SP2 (English or Japanese
edition, excluding x64 edition)
Windows 7 Enterprise SP1 (English or Japanese
edition)
CPU: Intel Pentium M 1.6 GHz or higher,
OS-recommended CPU
Memory: 256 MB or higher (512 MB or higher
recommended), OS-recommended memory
Available HDD space: 15 MB or higher (internal drive)
Monitor: XGA (1024 × 768) or higher
Communication: LAN (10BASE-T/100BASE-TX) or
COM (RS-232C)
User Account Control of Windows Vista/7
Windows Vista/7 incorporates the User Account Control
(UAC) function for improving its security level. As the
SRX Controller supports the UAC function, the warning
dialog of UAC may be displayed during installation or
activation of application.
When the warning dialog is displayed, allow execution of
the application in the following procedure.
When the unidentified application dialog is
displayed
Select [Allow] to allow execution of the application.