Table of Contents
Advertisement
Available languages
Available languages
User Manual Pro Mini 1200 AS Power Pack
2:
ON / OFF
32
Mechanical connection of lamp plugs
The EH Pro Mini flash head cables are screwable with round
sockets. Before connecting the lamp plug to the power pack,
the following must be observed:
•
Before connecting lamp plugs, turn off the power pack
using main switch 2.
•
Only use flawless plugs and sockets.
•
Plugging or unplugging of flash plugs must only be done
with the power pack switched off.
•
Unused sockets must be covered with locking caps
Insert lamp plugs into one of the flash sockets 16, 17, 18, or
19 and then safely lock them using the cap screw. To
remove the plug, complete unscrew the cap screw and pull
the plug upwards.
Third party manufacturers
Even through similar lamp sockets and plugs are used by other
manufactures as well, lamps and flash heads from these
manufactures must not be connected to the Pro Mini 1200 AS
power pack. This requires in every case an adapter cord. Ask
your HENSEL agent about suitable adapter cords for your
brand.
Number of flash heads connected
Max. 4 flash heads are allowed to be simultaneously connected
to the Pro Mini 1200 AS power pack. The maximum load
capacity of the flash head must not be exceeded.
Power distribution
Distribution of flash power is achieved symmetrically or
asymmetrically over the 2 channels A and B.
7
Operation
In the following you find a detailed description of all features
available for the Pro Mini power pack using the operation
panel. Alternatively you can control most of the functions of
the power pack using the radio control unit Strobe Wizard
Plus. For detailed information on its use please refer to page
37.
HENSEL Studiotechnik
Advertisement
Chapters
Table of Contents
