Fuses; Lamp Connections - Hensel Pro Mini 1200AS User Manual

10 AF
HENSEL Studiotechnik

Fuses

Outlets, in the building
Slow charging:
Normal charging:
Fuse for modeling lamp
The fuses are general lamp fuses. Make sure that only fuses
with the required value 10 A-quick are used.
Fuse for halogen lamp in flash head
The halogen lamp
5 x 20 mm melting fuse.
Caution:
Make sure that depending on the mains voltage the right
modeling lamp is in use and protected by the specified type of
fuse (see table below):
300W Halogen lamp
650W Halogen lamp

Lamp connections

Caution:
Before connecting lamp heads to the Pro Mini 1200 AS power
pack check the mains voltage and make sure that the head is
allowed to be operated (115V
The EH Pro Mini 1200 flash head has been specially designed
for use with Pro Mini 1200 AS power pack.
It is also possible to use the EH Pro Mini 1200P flash head, but
there are limitations: (1) there is no modelling light available and
(2) the power pack can only be operated in the SLOW charging
mode.
Before starting up the maximum loading of the flash head must
be observed (minimum 1200 Ws).
User Manual Pro Mini 1200 AS Power Pack
Ue = 230 V
10 A
16 A
in the head is
Ue = 230 V
2 AF quick
4 AF quick
∼ ∼
/ 230V / Bivoltage).
Ue = 115 V
16 A
20 A
protected by a
Ue = 115 V
4 AF quick
-----
31