Overview Of Controls - Hensel Pro Mini 1200AS User Manual

User Manual Pro Mini 1200 AS Power Pack
28
5

Overview of controls

Panel Pro Mini generator
1 Mains connector
2 ON/OFF: Main switch
3 SLOW: Slow charge (LED indicator)
4 RC/CH: Radio Receiver ON (LED indicator)
and channel selection
5 LED display for flash power / channel A
6 AUDIO:
Acoustical signal for flash readiness ON (LED indicator)
7 FC: Flash Check ON (LED indicator)
8 Dial for setting the flash power
9 SLAVE: Slave ON (LED indicator)
10 LAMP:
Modeling lamp OFF/FULL/PROP (LED indicator)
11 LED display for flash power / channel B
12 Ready Indicator for flash readiness
13 Slave, built-in
14 SYNC: Synchronization socket
15 TEST: Manual flash release
16 Socket A1
17 Socket A2
18 Socket B1
19 Socket B2
20 Switch for reducing the flash power
Full power – minus 300J – minus 450J
21 Switch from symmetric to asymmetric mode
22 Switch for reducing the flash power
Full power – minus 300J – minus 450J
Radio flash trigger and power control system
Strobe Wizard Plus – Transmitter
23 Flash power decrease button
24 Flash power increase button
25 Modeling Lamp ON/OFF switch
26 Channel selector for 3 channels and option 'All'
27 TEST: Manual flash release
28 SYNC/RC: Synchronization socket
29 Locking screw for mounting
to the Hot Shoe of the camera
30 Screw for opening the battery compartment
HENSEL Studiotechnik