Installing A Microsd Card - Motorola VC70N0 Quick Reference Manual

32
Installing a Micro SD Card
A micro SD (Secure Digital) card provides secondary non-volatile
storage. The card holder is located on the right side of the VC70 under
the Service door.
To install the micro SD card:
Remove the two T8 TORX screws securing the Service door.
1.
Push the memory card, with the contacts up, into the card slot until it
2.
locks.
Replace the Service door and secure using two T8 TORX screws.
3.
CAUTION
Torque the Torx head screws to 4.0 + 10% kgf-cm (3.5 ± 10% lbs-in).
Service Door
Micro SD Card
Ensure to torque the screws to seal the device properly.
Otherwise, sealing can be compromised.
Memory Card Slot
VC70 Vehicle Computer