Maintenance; Replacing The Desiccant Bag - Motorola VC70N0 Quick Reference Manual

42

Maintenance

The vehicle computer is factory-sealed. There are 3 user accessible
areas:
• Service door - provides access to the micro USB On-The-Go for
ActiveSync without the need to disconnect any accessory, access to
the Micro SD card slot and access to the desiccant.
• Access to the On/Off switch (the door can be removed without
affecting the sealing).
• Access to the backup battery.
For general cleaning:
• Clean the casing, keyboard, and display window by wiping with a soft
cloth. Use a damp cloth if necessary.
• Never use solvents or abrasive cleaners. You may damage the
display or keyboard.

Replacing the Desiccant Bag

The VC70 ships with a desiccant bag installed. The installer may wish
1.
to replace the desiccant in the VC70 with a new bag prior to installing
the VC70 on the vehicle, as transit and storage may have saturated
the desiccant.
Open the two screws securing the service door and remove the door.
2.
CAUTION
Pull out the old desiccant bag using the attached tab.
3.
Open the new desiccant package and remove the desiccant bag.
4.
Fold the four corners of the bag under to form a pillow.
5.
Place the desiccant bag in the desiccant well.
6.
Do not use any sharp tool to pull the desiccant bag out of
the VC70. Failure to comply may cause tear of the bag and
damage to the VC70.
VC70 Vehicle Computer