44
Connect the Backup Battery connector to the connector inside the
6.
Backup Battery well.
Secure the battery into location using four screws.
7.
Place the Backup Battery door over the battery and secure using the
8.
four captive screws.
CAUTION
Torque the screws to 9 + 0.5 kgf-cm (7.8 ± 0.4 lbs-in).
9.
Place the Main Power switch to the on position.
10.
It takes four hours to fully charge the Backup Battery.
Backup Battery
Backup Battery
Connector
Be sure to torque the screws to seal the device properly.
Otherwise, sealing can be compromised.
VC70 Vehicle Computer