Replacing The Backup Battery - Motorola VC70N0 Quick Reference Manual

Quick Reference Guide
Carefully place the service door onto the right side of the housing.
7.
CAUTION
Torque the torx head screws to 4.0 + 10% kgf-cm (3.5 ± 10% lbs-in).
8.

Replacing the Backup Battery

To replace the backup battery:
CAUTION
Place the Main Power switch on the right side of the vehicle computer
1.
to the off position and perform cold boot to electrically disconnect the
battery from the unit.
Open the four screws securing the Backup Battery door on the back of
2.
the vehicle computer and remove the door.
Open the four screws securing the Backup Battery and disconnect the
3.
Backup Battery connector.
Carefully pull the Backup Battery out of the computer.
4.
Place the new backup battery into the well.
5.
Be sure to torque the screws to seal the device properly.
Otherwise, sealing can be compromised.
Use ESD precautions when installing the backup
battery.
Desiccant Well
Desiccant Bag
Bag Tab
Service Door
43