Installing A Memory Card - Motorola VC5090 Quick Reference Manual

8

Installing a Memory Card

A memory card (Secure Digital) provides secondary non-volatile storage.
The card holder is located on the back of the VC5090 under the
UPS/Memory Card door.
To install the memory card:
Place the Main Power switch on the top of the vehicle computer to the
1.
off position.
Remove and discard the eight screws securing the UPS/Memory Card
2.
door.
Lift the card holder retaining door.
3.
Position the memory card, with the contacts down, into the card
4.
holder. The memory card corner notch fits into the holder only one
way.
Snap the retaining door closed.
5.
Replace the UPS/Memory Card door and secure using eight new
6.
screws.
CAUTION
Torque the screws to 9 +/- 0.5 kgf.cm (7.8 ± 0.4 in-lbs).
7.
Place the Main Power switch to the on position.
8.
Ensure to torque the screws to seal the device properly.
Otherwise, sealing can be compromised.
VC5090 Vehicle Computer