Advertisement
25. Enter the MAC address of the other access point. The below configuration will be based on
the example in Phase 1: Overview.
26. Click Reboot.
27. Click Reboot
28. Repeat steps 2-27 for TEW-738APBO #2.
Phase 3: Confirm Connectivity
1. Leave TEW-738APBO #2 connected to your computer.
2. Connect TEW-738APBO #1 to a LAN port of a router on your network.
3. To verify connectivity, run your computer's command prompt and ping TEW-738APBO #1's
assigned IP address from your computer.
4. A successful ping reply determines that both TEW-738APBOs are configured properly and
connected.
Press "Reboot" after all
configurations to enable new
setting.
6
Advertisement
