Advertisement
10. Confirm the new password.
11. Click Save.
12. Please wait while the access point
reboots.
S y s t e m is r e s t a r t i n g ,
p l e a s e w a i t f o r 4 4
s e c o n d s
13. Enter the username and the new
password, and then click OK.
14. Click System " LAN.
15. Select Static IP.
16. Configure the IP address, IP Netmask
and IP Gateway based on the example in
Phase 1: Overview.
17. Select Specify DNS Server IP.
18. Configure the Primary DNS based on the
example in Phase 1: Overview.
19. Click Save.
20. Click System " Operating Mode.
21. Select WDS Mode and then click Save &
Reboot.
22. Please wait while the access point
reboots.
S y s t e m is r e s t a r t i n g ,
p l e a s e w a i t f o r 5 0
s e c o n d s
23. Enter the username and password, and
then click OK.
24. Click Wireless " WDS.
Note: To protect your network from any
unauthorized access it is recommended to
enable wireless encryption.
5
Advertisement
