Advertisement
The TEW-738APBO will be setup with the following IP address assignment:
TEW-738APBO #1
IP Address: 192.168.10.50
IP Netmask (Subnet Mask): 255.255.255.0
IP Gateway (Gateway IP Address): 192.168.10.1
Primary DNS: 192.168.10.1
TEW-738APBO #2
IP Address: 192.168.10.51
Subnet Mask: 255.255.255.0
Gateway IP Address: 192.168.10.1
Primary DNS: 192.168.10.1
6. Enable WDS mode.
7. Enable WPA2-PSK AES encryption and configure a wireless password for the access point.
8. Enter the MAC address of the other outdoor access point.
9. Repeat the process for the second outdoor access point.
10. Confirm connectivity between the two access points.
Phase 2: WDS Setup
Note:
• The initial configuration should be completed in a testing environment with two
TEW-738APBO's approximately 15 ft. (5 meters) apart from one another.
• Configure and connect the devices before mounting.
©
19
L
3
Advertisement
