Advertisement
1. Refer to the above diagram.
2. Mount the TEW-738APBOs in your desired location. See Pole Mounting the TEW-738APBO
for mounting instructions.
3. Connect the TEW-738APBOs to their respective network.
4. Confirm that the TEW-738APBOs are facing each other.
5. Verify that the status LED indicators on both TEW-738APBOs are fully functional: PWR
[Power](Greeii / Solid), LAN (Blinking / Green), Wireless Signal Strength (Blinking /
Green).
Wireless Signal Strength
Connecting the Grounding Wire
1. Identify the grounding hole on the outdoor access point. You w
2. Align one end of the grounding wire over the hole. Then secure grounding wire with the
provided screw and washer.
3. Connect the green grounding wire to a grounding object.
e.g. Earth driven rod, grounded electrical system.
l see a symbol next to the hole.
9
LAN
Power
Advertisement
