Drilling Outboard Mounting Holes - Mercury 75 Operation Maintenance Warranty Installation Manual

2. Fasten outboard to the transom at this height. Refer to Fastening the
Outboard.

Drilling Outboard Mounting Holes

IMPORTANT: Before drilling any mounting holes, carefully read Determining
Recommended Outboard Mounting Height and install outboard to the
nearest recommended mounting height.
1. Mark four mounting holes on the transom using the transom drilling
fixture.
a
eng
OUTBOARD INSTALLATION
c
a - Drill guide holes
b
b - Transom drilling fixture
c - Transom centerline
a
2757
127
22403