Mercury 75 Operation Maintenance Warranty Installation Manual page 145

6. Attach two cable ties around the grommet tube. Attach the cowl seal.
a - Cable tie
FLUSH HOSE ROUTING
If desired, the flush hose can be routed outside the cowling as follows:
1. Using a needle‑nose pliers, break out the semi‑circular knockouts in the
access cover and lower cover. Smooth the edges of the knockout with
sandpaper or a small knife.
2. Route the flush hose through this opening.
a
b
a - Knockout
b - Flush hose
eng
OUTBOARD INSTALLATION
a
135
23639
23642