Mercury 75 Operation Maintenance Warranty Installation Manual page 106

• Propeller shaft ‑ Refer to Propeller Replacement for removal and
installation of the propeller. Coat the entire propeller shaft with
lubricant to prevent the propeller hub from corroding and seizing to the
shaft.
2. Lubricate the following with 2‑4‑C with PTFE.
Tube Ref
Description
No.
2-4-C with PTFE
95
• Swivel bracket ‑ Lubricate through fitting.
• Tilt support lever ‑ Lubricate through fitting.
27873
• Tilt tube ‑ Lubricate through fitting.
• Steering cable grease fitting (if equipped) ‑ Rotate steering wheel to
fully retract the steering cable end into the outboard tilt tube. Lubricate
through fitting.
MAINTENANCE
Swivel bracket, tilt support lever, tilt
tube, steering cable grease fitting
a - Swivel bracket
b - Tilt support lever
a
b
26902
Where Used
29478
96
Part No.
92-802859A 1
eng