Mercury 75 Operation Maintenance Warranty Installation Manual page 18

3. Damage caused by neglect, lack of maintenance, accident, abnormal
operation, or improper installation or service.
4. Haul‑out, launch, towing charges, removal and/or replacement of boat
partitions or material because of boat design for necessary access to the
product, all related transportation charges and/or travel time, etc.
Reasonable access must be provided to the product for warranty service.
Customer must deliver product to an authorized dealer.
5. Additional service work requested by customer other than that necessary
to satisfy the warranty obligation.
6. Labor performed by other than an authorized dealer may be covered only
under the following circumstances: when performed on emergency basis
(providing there are no authorized dealers in the area who can perform
the work required or have no facilities to haul‑out, etc., and prior factory
approval has been given to have the work performed at this facility).
7. All incidental and/or consequential damages (storage charges, telephone
or rental charges of any type, inconvenience or loss of time or income)
are the owner's responsibility.
8. Use of other than Mercury Precision or Quicksilver parts when making
warranty repairs.
9. Oils, lubricants, or fluids changed as a matter of normal maintenance is
customer's responsibility unless loss or contamination of same is caused
by product failure that would be eligible for warranty consideration.
10. Participating in or preparing for racing or other competitive activity or
operating with a racing type lower unit.
11. Engine noise does not necessarily indicate a serious engine problem. If
diagnosis indicates a serious internal engine condition which could result
in a failure, condition responsible for noise should be corrected under the
warranty.
12. Lower unit and/or propeller damage caused by striking a submerged
object is considered a marine hazard.
13. Water entering engine through the fuel intake, air intake, or exhaust
system or submersion.
14. Failure of any parts caused by lack of cooling water, which results from
starting motor out of water, foreign material blocking inlet holes, motor
being mounted too high, or trimmed too far out.
15. Use of fuels and lubricants which are not suitable for use with or on the
product. Refer to the Maintenance section.
16. Our limited warranty does not apply to any damage to our products
caused by the installation or use of parts and accessories which are not
manufactured or sold by us. Failures which are not related to the use of
those parts or accessories are covered under warranty if they otherwise
meet the terms of the limited warranty for that product.
WARRANTY INFORMATION
8
eng