Shortcut Keys Operation; Connecting Power; Selecting The Signal Source - Teac LCHD2040 User Manual

Shortcut keys operation

Connecting POWER

Notes: 1) C
onnect the supplied AC power cord to this socket and to the wall outlet.
2) Always turn off the AC power switch or remove the AC power plug from the outlet when not using
For a long period of time.
ON/OFF Standby
Once main AC power is applied and switched ON. Press the Power/Standby button on the side of the LCD TV or
on the remote control to turn on the LCD TV, press again after 5 second will return the LCD TV to standby.

Selecting the signal source

1. Turn on the power of the connected video equipment.
2. Press SOURCE button to Toggle between input source. The input will switch as follows each time you
press the source button.
3.The Video (13) and S-Video (14) input is sharing the same Audio input (12) socket.
4. The Component (17) and PC (18) input is sharing the same Audio input (16) socket.
TV TV
NOTE:
Video, and S-Video signals are sharing the same input, please make sure that:
1. if you connect VIDEO input (RCA), S-VIDEO input must be disconnect.
2. if you connect S-VIDEO input, VIDEO (RCA) input must be disconnect.
Video Video
S-Video S-Video
VGA VGA
Component Component
DISPLAY
TV
Video
S-Video
VGA
Component
-14-
INPUT TERMINAL
Antenna
Video
S-Video
PC IN(D-Sub15)
Y P /C P /C
B B R R