Dvd Playback Operation; Preparation; Dvd Playback - Teac LCDV3255HD User Manual

DVD Playback Operation

Preparation

1. Connect the unit to the power supply and press the POWER button to turn on the unit.
2. Repeatedly press the INPUT button on the remote control to select DVD mode and press the ENTER
button to enter.
3. Gently insert the disc, with the label side toward the front of the television, into the disc tray slot
until about half of the disc is in the tray and then the disc will be drawn into the disc tray and loaded
automatically.
note: must select DVD mode before insert disc.
4. Press the EJECT button to eject the disc, but the disc can not be drawn into the disc tray by
pressing the
automatically.
Warning: Use of poor quality discs could result in damage to the television.

DVD Playback

Region Code
DVD players and discs are coded by region. These regional codes must match the played discs. If the
codes don't match, the disc cannot be played. This player's default code is 4.
Play
Press the PLAY button to start playback.
Stop
During playback, press the ■ STOP button once to stop playback and press the ► PLAY button to
resume normal playback. Press the ■ STOP button twice to stop playback completely.
Pause
During playback, press the PAUSE button once to pause the playback; press it repeatedly to start
step-by-step playback. Press the ► PLAY button to resume normal playback.
EJECT button again. You must push the disc until it is drawn into the disc tray
37