Table of Contents
Advertisement
Shortcut keys operation
Selecting the picture mode
You can select the picture mode instantly from among three preset
modes and one user-set mode. Press the P.MODE button on the remote
control repeatedly to select the desired picture mode.
Selecting the sound mode
You can select a sound effect from among three preset
modes and one user-set mode. Press the S.MODE button on the
remote control repeatedly to select the desired sound effect.
Selecting STEREO/MONO broadcasts
You can enjoy watching TV while listening to high-fidelity stereo sound with the A2 Stereo feature.
Press the STEREO button on the remote control to switch between MONO and STEREO.
Menu operation
Using the Picture Parameters menu
Adjust picture settings
1) Press the MENU button to enter the main menu.
[
or
]
2) Press the
[
or
]
3) Press the
[
or
]
4) Press the
5) The adjusted data is stored automatically as the USER picture preset.
NOTE: Some picture settings will not be shown unless applicable to the input signal type.
For example: Hue will only appear when the input video signal is NTSC.
6) Press OK button to confirm your selection and press OK again to exit from the menu.
button to select the item Picture Parameters.
button to highlight and select the item you want to adjust.
button to adjust the level.
-16-
P.MODE
Normal
User
Soft
Bright
S.MODE
Normal
User
Speech
Music
Picture Parameters
Britghtness
Contrast
Colour
Sharpness
Color Temp
Hue
50
50
50
50
Normal
50
Advertisement
Table of Contents
