Connecting To A Personal Computer Or Notebook; Connecting The Aerial/Cable Antenna - Teac LCHD2040 User Manual

Connecting your TV
NOTE: 1) Headphones are not included.
2) No sound will be heard from the
main unit speakers when a
headphone mini-plug is connected
into the headphone jack.

Connecting to a Personal Computer or Notebook

You can use your TV as a monitor for
Connect the devices as shown below.
NOTE:
The refresh rate of your PC & Notebook must be adjusted to 60Hz or below.
Connecting to an Aerial / Cable antenna
To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor aerial (not supplied).
Perfect picture quality requires a good signal and generally means that an outdoor aerial must be implemented. The
exact type and location of the aerial will depend on your particular area. Consult your local dealer or service
personnel for best advice. If you are a subscriber of your local Pay TV network, the outdoor or indoor aerial is not
needed. Connect the equipment as follows:
your PC or Notebook by
PC/NB
To VGA
RGB line
Headphone
connecting through the PC IN (VGA) connection jack.
PC IN
(cable not included)
Plug(not supplied)
COAXIAL CABLE (75W )
TWIN-LEAD FEEDER(300 W )
Adaptor (not supplied)
Loosen the screw
-12-
The signal comes from:
An outdoor antenna
An indoor antenna
Pay TV network
Insert the feeder in
Tighten the screw