Basic Operation; Power On/Off; Channel Selection; Input Source Selection - Teac LE55AE1UHD User Manual

First Time Installation
While Auto Tuning is in progress, the screen displays the progress bar.
If you need to stop tuning, press the EXIT button.

Basic Operation

Power On/Off

To turn on the TV
1.Connect the power play into the wall outlet.
The power indicator lights in red, indicating that the TV
is in standby mode.
2. Press
The power indicator lights turns off and the TV turns on.
To turn off the TV
Press
The power indicator lights in red and the TV turns off to
standby mode.
It takes approximately 10 seconds for the picture to appear
●
after the TV is turned on.
The TV will switch to standby mode automatically if there is
●
no signal input for 10 minutes.
If the TV will not be used for a long periods of time, unplug the
●
TV from the wall outlet.

Channel Selection

To select a channel
Press CH+/- or Program Select buttons to select the
channel number directly.

Input Source Selection

To select input source
1. Press the INPUT button.
2. Press ▼/▲ to select the desired input source, then
pres the OK button to confirm. The TV will switch to the
selected input source.

Volume Adjustment

To change the volume
1.Press VOL+ to increase the sound volume.
2.Press VOL- to decrease the sound volume.
To mute the sound
1.Press to temporarily turn off the sound.
2.Press or VOL+ to restore the sound to previous level.
You can decrease the sound volume by pressing VOL-
while the sound is muted.
On-Screen Display (OSD) Selection and
Adjustment
1. Press "MENU" to display the main menu.
2. Press ◄/► to select a menu. The selected menu
page displays.
3. Press ▼/▲ to set your selection.
4. Press ▼/▲ to choose an item on the menu page and
press ► or OK to confirm.
5. Press ◄/► to adjust an item value or choose options.
6. Press "MENU" to return to the menu, To exit the
on-screen menu completely, press EXIT.
The OSD menu screen will be closed automatically when no
operation has been made for the set OSD menu display time.
13