Cisco RV132W Administration Manual page 95

Firewall
Access Rules Configuration
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router Administration Guide
Adding Access Rules
All configured firewall rules on the device are displayed in the Access Rules
Table. This list also indicates whether the rule is enabled (active) and gives a
summary of the From/To zone as well as the services and users the rule affects.
To create an access rule:
Select Firewall > Access Rules.
Click Add Row.
In the Connection Type field, select the source of originating traffic:
• Outbound (LAN > WAN) - Select this option to create an outbound rule.
• Inbound (WAN > LAN) - Select this option to create an inbound rule.
• Inbound (WAN > DMZ) - Select this option to create an inbound rule.
• Inter-VLAN (VLAN > VLAN) - Select this option to create an inter-VLAN rule.
• Inter-VLAN (VLAN >DMZ) - Select this option to create an inter - VLAN rule.
From the Action drop-down list, select the action:
• Always Block—Always block the selected type of traffic.
• Always Allow—Never block the selected type of traffic.
• Block by schedule—Blocks the selected type of traffic according to a
schedule.
• Allow by schedule—Allows the selected type of traffic according to a
schedule.
From the Services drop-down list, select the service to allow or block for this rule.
Select All Traffic to allow the rule to apply to all applications and services, or
select a single application to block:
• Domain Name System (DNS), UDP or TCP
• File Transfer Protocol (FTP)
• Hypertext Transfer Protocol (HTTP)
• Secure Hypertext Transfer Protocol (HTTPS)
• Trivial File Transfer Protocol (TFTP)
• Internet Message Access Protocol (IMAP)
5
93