Leveling Build Plate - Flashforge Creator Pro Quick Start Manual

Leveling Build Plate

(1)
Turn the knob clockwise
Raise the build plate to reduce the distance
between the nozzle and build plate.
(2)
SD Card Input
(1) Attach the power supply, plug the power cord into an electrical outlet
and turn on the printer.
(2) Insert the SD card into the slot. Select [Print from SD] and press [OK].
Select [ENG] and press [OK].
Then you will see the [Plateleveling.x3g].
Adjust the leveling knobs to level the build plate
FF Creator Pro
Print from SD
Preheat
Utilities
PlateLeveling.x3g
type
1
Exit Menu
Turn the knob anticlockwise
Lower the build plate to increase the distance
between the nozzle and build plate.
_
ENG
Exit Menu