Figure 2-2. Serial Interface Module And Connector P1 - Motorola MVME761-001 Installation And Use Manual

Figure 2-2. Serial interface module and connector P1

2. Place the SIM onto the transition module SIM connector, making
3. Gently press the top of the SIM to seat it on the transition module
Note
4. Secure the SIM to the transition module standoffs with the two
http://www.mcg.mot.com/literature
P1
Mounting Hole
sure that the mounting holes also line up with the standoffs on the
transition module as shown in
SIM connector. If the SIM does not seat with gentle pressure, re-
check the alignment of the connectors.
Do not force the SIM onto the transition module.
Phillips-head screws provided. Do not over tighten the screws.
Installing the Serial Interface Modules
Mounting Hole
Alignment
Key
Figure 2-3.
2
11637 9610
2-3