HART Loop Converter KFD2-HLC-(Ex)1.D(.**)
Editing device data: Unit
8.2
Unit
The following illustration shows the unit menu. Items from the lowest menu level are outlined in bold.
Unit
•
If you select auto, the unit transferred by the HART field device for the relevant variable (PV, SV,
TV, QV) appears on the HLC display.
•
If you select custom, the Custom Tag appears on the HLC display as the unit for the relevant
variable (PV, SV, TV, QV).
•
The selected unit is also used for all corresponding settings in parameterization mode.
Enter the Custom Tag as follows:
•
Initial display:
Select one of the eight positions in front of ↵ for the
•
•
Select OK. The
•
Select a character by pressing the
•
Repeat the position and character selection process until the character string is complete.
——
PV
SV
TV
QV
↵ (or previous Custom Tag with
flashes.
or
——
Type
Custom tag
——
same as PV
——
same as PV
——
same as PV
as first character and ↵ )
by pressing the
keys. Select OK.
——
auto
custom
——
(see below)
or
keys.
21