Use the citrus press to squeeze the juice
from citrus fruits (eg oranges, lemons, limes
to use the citrus press
1 Fit the drive shaft and bowl onto the power
2 Fit the sieve into the bowl - ensuring the sieve
handle is locked into position directly over
the bowl handle
3 Place the cone over the drive shaft turning
until it drops all the way down
4 Cut the fruit in half. Then switch on and
press the fruit onto the cone.
The citrus press will not operate if
the sieve is not locked correctly.
mini processor bowl
Use the mini processor bowl to chop herbs
and process small quantities of ingredients
e.g. meat, onion, nuts, mayonnaise,
vegetables, purées, sauces and baby food.
mini processor knife blade
mini processor bowl
to use the mini processor
1 Fit the detachable shaft over the power unit
2 Then fit the main processor bowl.
3 Fit the mini processor bowl - ensuring the ribs
on the inside of the mini bowl chimney align
with the slots in the main bowl chimney
4 Place the knife blade over the drive shaft
5 Add the ingredients to be processed.
6 Fit the lid and switch on.
Never remove the lid until the knife blade has
The knife blade is very sharp - always handle
Don't process spices – they may damage the plastic.
Don't process hard food such as coffee beans, ice cubes or chocolate – they
may damage the blade.
Herbs are best chopped when clean and dry.
Always add a little liquid when blending cooked ingredients to make baby food.
Cut foods such as meat, bread, vegetables into cubes approximately 1-2 cm
in) before processing.
When making mayonnaise add the oil down the feed tube.
care & cleaning
Always switch off and unplug before cleaning.
Handle the blades and cutting discs with care - they are
Store your slicing/shredding discs in the storage box
Some foods may discolour the plastic. This is perfectly
normal and won't harm the plastic or affect the flavour of
your food. Rub with a cloth dipped in vegetable oil to
remove the discolouration.
Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food
Store excess cord in the storage area at the back of the machine.
twin beater geared whisk
Detach the beaters from the drive head by gently pulling them free. Wash in
warm soapy water.
Wipe the drive head with a damp cloth, then dry. Do not immerse the
drive head in water.
all other parts
Wash by hand, then dry.
Alternatively they can be washed on the top rack of your dishwasher. A short
low temperature programme is recommended.
service & customer care
If the cord is damaged it must, for safety reasons, be replaced by Kenwood or
an authorised Kenwood repairer.
If you need help with:
Using your machine
Servicing or repairs (in or out of guarantee)
call Kenwood on 023 92392333 and ask for customer care. Have your
model number ready - it's on the underside of the processor.
See our advertisement in Golden Pages.
Contact the shop where you brought the food processor.
guarantee UK only
If your food processor goes wrong within one year from the date you bought it,
we will repair it (or replace it if necessary) free of charge provided:
you have not misused, neglected, or damaged it;
it has not been modified (unless by Kenwood);
it is not second hand;
it has not been used commercially;
you have not fitted a plug incorrectly; and
you supply your receipt to show when you brought it.
In addition to the one year guarantee which the machine carries, the motor is
guaranteed for a further four year period. If the motor fails we will repair it (or
replace it if necessary) free of charge provided the above requirements are met.
This guarantee does not affect your statutory rights.