Video Adjustment For Specific Area - Pioneer DVR-RT602H-S Service Manual

5

7.1.4 VIDEO ADJUSTMENT FOR SPECIFIC AREA

[Purposes]
Depending on the area, if a flicker
may appear in a picture received by
the tuner, it can be corrected or
reduced with this setting.
1. Specific-Channel Setting mode
In this mode, specific settings can be made for up to 12 channels.
For channels that do not have specific settings, the settings of General Setting mode are applied.
[How to enter this mode]
1 Select a channel or line input (L1,L2) on which a specific setting is to be made.
2 Press the ESC then CHP/TIM keys on the remote control unit for servicing. "General Setting mode"
is displayed.
3 Press the DIG/ANA key in General Setting mode. Specific-Channel Setting mode is entered.
Press the ESC key on the remote control unit for servicing to return the Normal mode.
[How to exit]
Setting is in effect only during recording/playback stop.
[Note]
[Setting examples]
The setting examples in Specific-Channel Setting mode are shown below.
For details on each setting item, see "Table 1: Key operations in Specific-Area Setting mode."
[When specific channel setting have NOT been made]
Specific Area Mode
Input - [ TUNER ]
Sync AGC
H Threshold Level : 12
General setting
data
V Threshold Level : 10
EPG EQ
RGB Line Mask
Individual setting state
Input Channel - [
Specific channel
Sync AGC
setting data
H Threshold Level : ------
V Threshold Level : ---
• If a channel that does not have specific settings is displayed, the setting figures are displayed as hyphens (- -).
[Tips]
• If the setting figures are not displayed as hyphens, those settings have been specifically set even if they are
identical to the default settings or those of General Setting mode.
• The setting indicated with an asterisk (*) is the default.
• The channels to be indicated for "Input Channel" are as shown below:
Line inputs: L1,L2
Tuner channels: Channels received by the tuner (channels to be set in Specific-Channel Setting mode, etc.)
5
6
[Tools to be used]
Remote control unit supplied
with the unit (07660ML010)
: ON *
*
: OFF *
: 28 *
1CH ]
: ---
DVR-RT602H-S
6
7
STANDBY/ON VHS/HDD/DVD
PAUSE LIVE TV HOME MENU INFO
TOP MENU
DISC
NAVIGATOR GUIDE
CHANNEL
+
CM CM
BACK ENTER SKIP
PAUSE RETURN
CHANNEL
-
REC PLAY STOP
STOP REC PREV NEXT
OPEN
DVD RECORDER
Remote control unit for servicing
(GGF1381)
[When specific channel setting have been made]
Specific Area Mode
Input - [ TUNER ]
Sync AGC : ON
H Threshold Level : 12
V Threshold Level : 10
EPG EQ : OFF
RGB Link Mask : 28
Individual setting state
Input Channel - [ 1CH ]
Sync AGC : ON
H Threshold Level : 14
V Threshold Level : 7
7
8
A
B
C
*
*
D
*
*
*
*
E
F
115
8