Pioneer DVR-RT602H-S Service Manual page 151

5
2-16: CLUTCH ASSY/RING SPRING/CLUTCH
LEVER/CLUTCH GEAR (Refer to Fig. 2-16-A)
1. Remove the Polyslider Washer 1.
2. Remove the Clutch Assy and Ring Spring.
3. Remove the Clutch Lever.
4. Remove the Coupling Gear, Coupling Spring and Clutch
Gear.
1
Coupling Gear
Coupling Spring
Clutch Gear
NOTE:
1. In case of the Clutch Assy installation, install it with
inserting the spring of the Clutch Assy into the dent of
the Coupling Gear. (Refer to Fig. 2-16-B)
2-17: CASSETTE GUIDE POST/INCLINED BASE
S/T UNIT/P4 CAP/LED REFLECTOR
(Refer to Fig. 2-17-A)
1. Remove the P4 Cap.
2. Unlock the support 1 and remove the Cassette Guide
Post.
3. Remove the Inclined Base S/T Unit.
4. Remove the screw 2.
5. Remove the LED Reflector.
5
6
Clutch Assy
Ring Spring
Clutch Lever
Fig. 2-16-A
Clutch Assy
Coupling Gear
Fig. 2-16-B
DVR-RT602H-S
6
7
1
Inclined Base S
Unit
LED Reflector
2
Screw Torque: 5 ± 0.5kgf•cm
NOTE:
1. Do not touch the roller of Guide Roller.
2. In case of the P4 Cap installation, install it with parallel
for "A" and "B" of Fig. 2-17-B.
3. In case of the Cassette Guide Post installation, install
correctly as the circled section of Fig. 2-17-C.
"A"
P4 Cap
[OK]
Cassette Guide Post
[NG]
Cassette Guide Post
7
8
Cassette Guide Post
Inclined Base T Unit
P4 Cap
Fig. 2-17-A
"B"
Cassette Opener
Fig. 2-17-B
Fig. 2-17-C
151
8
A
B
C
D
E
F