Video Adjustment For Specific Area - Pioneer DVR-660H-S Service Manual

5

8.6 VIDEO ADJUSTMENT FOR SPECIFIC AREA

[Purposes]
Depending on the area, if a flicker
may appear in a picture received by
the tuner, it can be corrected or
reduced with this setting.
[1] Specific-Channel Setting Mode
In this mode, specific settings can be made for up to 12 channels.
For channels that do not have specific settings, the settings of General Setting mode are applied.
[How to enter this mode]
Select a channel or line input (L1-L3) on which a specific setting is to be made.
Press the ESC then CHP/TIM keys on the remote control unit for servicing. "General Setting mode"
is displayed.
Press the DIG/ANA key in General Setting mode. Specific-Channel Setting mode is entered.
[How to exit] Press the ESC key on the remote control unit for servicing to return the Normal mode.
[Note]
Setting is in effect only during recording/playback stop.
[Setting examples]
The setting examples in Specific-Channel Setting mode are shown below.
For details on each setting item, see "Table 1: Key operations in Specific-Area Setting mode."
[When specific channel setting have NOT been made]
VDEC Specific Area Mode Ver2.00
Input - [ TUNER ]
Sync AGC
H Threshold Level : 12
General setting
data
V Threshold Level
EPG EQ
Individual setting state
Input Channel - [
Specific channel
setting data
Sync AGC
H Threshold Level : ---
V Threshold Level
• If a channel that does not have specific settings is displayed, the setting figures are displayed as hyphens (- -).
[Tips]
• If the setting figures are not displayed as hyphens, those settings have been specifically set even if they are
identical to the default settings or those of General Setting mode.
• The setting indicated with an asterisk (*) is the default.
• The channels to be indicated for "Input Channel" are as shown below:
Line inputs: L1-L3, DV (DV is not valid for specific-area settings.)
Tuner channels: Channels received by the tuner (channels to be set in Specific-Channel Setting mode, etc.)
5
6
[Tools to be used]
Remote control unit supplied
: ON *
*
: 10
: OFF *
1CH ]
: ---
: ---
DVR-660H-K
6
7
Remote control unit for servicing
with the unit
[When specific channel setting have been made]
VDEC Specific Area Mode Ver2.00
Input - [ TUNER ]
Sync AGC : ON
H Threshold Level : 12
V Threshold Level : 10
EPG EQ : OFF
Individual setting state
Input Channel - [ 1CH ]
Sync AGC : ON
H Threshold Level : 14
V Threshold Level : 7
7
8
A
(GGF1381)
B
C
D
*
*
*
*
*
E
F
93
8