Pioneer DVR-RT602H-S Service Manual page 128

1
Table 1: Description of VR-recording-related errors
Any error message marked with ∗ is displayed "RecErr : ---------" on the Subscreen 1 of the fourth screen.
Error related to MPEG Encoder
A
Error Message
AVEnc Hang
IN Encode *
No SysHdr IN
Stm Start NG
Stream NG
Strm Start NG
Error related to Drive system
In a case of an error in the drive system, scratches or dirt on a disc, or a problem of the drive itself (dirty pickup) may be suspected.
Error Message
B
Bdr Cls NG
Bdr Opn NG
BUF Overflow
CLS Rzon Fail
Drive Hang
Drv Err
Drv Hard Err
Drv TimeOut
Fail Repair
Format NG
May Be V mode
Mech No Res
C
MKB Invalid
NWA Exhaust
OPC NG
PCA Full
Read Err
ReadOnly DISC *
RMA Full
Rzn Cls NG
Rzn Rpr NG
Rzn Rsv NG
TMP-VMG WrErr
VTSI_B Wr Err
D
VTSI_B2 Wr Err
VTSI Wr Err
VTSI2 Wr Err
Write Err
May Be PVR
V Final fail
DLVR trace NG
Error related to Dubbing
Error Message
H2D CP SomeNG
E
Mem get NG
Strm TransfNG
Tracon Trn NG
VC Cell Max
VC CopyCancel
VC FlushC NG
VC HDD C Err
VC HDD Inf NG
VC HDD Info NG
VC Idling NG
VC Pck Anl NG
F
128
1
2
Description
AVEncoder failed
Changes cannot be made in the process of encoding
System packet is not input periodically
Failure to start encoding (reasons not clear)
Inappropriate input stream data
Timeout waiting for system packet input at the beginning
Description
Close Border failed
Open Border failed
Overflow of the Stream Buffer
Video Mode Close Rzone failure
The Drive is hung up.
General error of the drive
Abnormality in the drive hardware or firmware
Timeout waiting for drive operation
Repair failed
Format failed
Although TMP_VMGI is not written, it may be Video Mode disc.
No response from the mechanical-control computer
MKB reading error
NWA surpassed and impossible to use
OPC failed
PCA has been used up.
Reading failed, ECC failed, etc.
Because some data are invalid, data cannot be written
RMA has been used up.
Close RZone failed
Repair RZone failed
Reserve RZone failed
Video Mode TMP VMGI Write Error
Video Mode VTSI BUP Write Error
Video Mode VTSI BUP Write Error (After Layer Change)
Video Mode VTSI Write Error
Video Mode VTSI Write Error (After Layer Change)
The Drive failed to write and could not be recovered.
May be +VR disc, but no RSAT
Abnormal process occurred when finalizing Video mode
Close Rzone failed at dual layer disc
RSAT : Reserved Space Allocation Table
Description
Other NG HDD →DVD copy
Video Mode Copy Memory has not ensured.
Video Mode Copy Stream Transfer NG
Video Mode Copy Tracon tranfer has not been completed.
Maximum number for Video Mode copy Cells exceeded
Video Mode Copy Copy Cancel
Video Mode Copy Flush Cache NG
Obtaining Video Mode Copy HDD Cell information failed
No information on Video Mode Copy HDD
Format failed
Video Mode Copy idling NG
Analizing Video Mode Copy Pack failed
DVR-RT602H-S
2
3
3
4
4