Canon SELPHY CP1200 User Manual page 94

ç Contents
Changing the Connection Method
You can change the connection method to suit how you use the printer.
z z Press the <k> button and then the <u><d> buttons to select
[Wi-Fi Settings], and then press the <o> button.
z z Press the <u><d> buttons to select [Connection Method], and
then press the <o> button.
z z Press the <u><d> buttons to select a connection method, and
then press the <o> button.
Disabling Wi-Fi
Disable Wi-Fi connections as follows.
z z
Press the <k> button and then the <u><d> buttons to select
[Wi-Fi Settings], and then press the <o> button.
z z
Press the <u><d> buttons to select [Wi-Fi], and then press
the <o> button.
z z
Press the <u><d> buttons to select [Disable], and then press
the <o> button.
z z
To re-enable Wi-Fi connections, repeat these steps and select
[Enable].
Checking Wi-Fi Settings Information
Check information (including the printer name and IP address) as
follows.
z z
Press the <k> button and then the <u><d> buttons to select
[Wi-Fi Settings], and then press the <o> button.
z z
Press the <u><d> buttons to select [Confirm Settings], and
then press the <o> button.
z z
Press the <u><d> buttons to check setting information.
z z
Press the <v> button to exit.
94