Canon SELPHY CP1200 User Manual page 82

ç Contents
• If you selected [PIN Method] in step 7, use the computer to specify
the PIN code (displayed on the printer) on the access point, press
the <o> button on the printer, and go to step 9. For instructions on
configuring PIN codes, refer to the access point user manual.
• On SELPHY, wireless signal strength is indicated by the following
icons.
[ ] High, [
8
On the access point, hold
down the WPS connection
button for a few seconds.
z z
For details on where the button
is located and how long to press
it, check the access point user
manual.
9
Establish the connection.
z z
On the printer, press the <o>
button.
z z
[Connecting] is displayed on the
printer, followed by [Connected
to access point] when connected.
Press the <o> button.
z z The screen at left is displayed,
indicating the name of the access
point.
] Medium, [ ] Low, [ ] Weak, [
82
] Out-of-range