Outlaw 970 Owner's Manual page 7

7.1 channel preamplifier processor
Table of Contents

Advertisement

Model 970 Front Panel
FP
FP
1

FP
FP
FP
11
1
1
FP1 Headphone level knob (see page 39)
Adjusts the volume level of the headphones.
FP1 Tuner button (see page 38)
Selects between AM or FM.
FP15 Tune Mode button (see page 38)
Selects between FM mono and FM stereo.
FP16 Preset button (see page 39)
Advances tuner to the next preset in the selected frequency band
(AM or FM).
FP

NOTE:
The Model 970 is shipped with insert
covers for the front panel inputs.
To remove them, press gently on the left
side of the insert until the right side pops
out, and then pull the insert towards you.
To replace the inserts, slip the left side in
first while holding the insert at a 45
degree angle, and then gently push the
right side of the insert into place.
FP
FP
FP

5
6
FP
FP
FP
1
15
16
FP17 Digital  Inputs (Coaxial and Optical) (see pages 15-23)
Connect the output of a portable or other device with digital audio to
these jacks. They may be assigned to any video input.
FP18 S-Video  input (see pages 15-23)
Connect the S-Video output of a game console, camcorder or any other
portable video device to this input.
FP19 Composite video  input (see pages 15-23)
Connect the composite video output of a game console, camcorder or
any other portable video device to this input.
FP0 Stereo analog audio inputs (see pages 15-23)
Connect audio for video game systems, camcorders, and portable music
or DVD players.
Model 970 7.1 Channel Preamplifier Processor
Owner's Manual
Model 970 Front Panel
FP
FP
FP
FP
7
8
9
10
FP
FP
FP
FP
17
18
19
0
7

Advertisement

Table of Contents
loading

Table of Contents