Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Outlaw OAWA3
Summary of Contents for Outlaw OAWA3
- Page 1 OAWA3 Wireless Transmitter/ Amp-Receiver System...
-
Page 2: Table Of Contents
Table of Contents OAWA3 Wireless Transmitter/Amp-Receiver System Table of Contents 3 Safety & Warnings Safety Overview Safety Instructions 5 System Function System Function Description Features 6 Package Content 7 Transmitter Basic Setup WA-50t Wireless Transmitter 8 Computer Media Server Connections... -
Page 3: Safety Overview
Unpacking and Assembly Instruction Manual Safety Overview The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. -
Page 4: Safety & Warnings
Safety & Warnings OAWA3 Wireless Transmitter/Amp-Receiver System Safety Instructions 1. Read these instructions. d. If the apparatus does not operate normally by following the operating instructions. Adjust only 2. Keep these instructions. those controls that are covered by the operating instructions as an improper adjustment of other 3. -
Page 5: System Function
Instruction Manual System Function System Function Description The OAWA3 System is designed to wirelessly transmit an audio source signal from one loca- tion to a dedicated wireless audio amplifier. The audio amplifier is then connected to any general purpose loudspeaker. -
Page 6: Package Content
Package Content OAWA3 Wireless Transmitter/Amp-Receiver System Package Content OAW3-t Wireless OAWA3-r Receiver/Amplifier Remote Transmitter USB AC Power Adapter 24VDC, 48W Power Supply 1/8” Stereo Cable 1/8” Mono to RCA Cable Power Cord USB cord IR Receiver Cable 1/8” Stereo to RCA Cable... -
Page 7: Transmitter Basic Setup
4. Connect the 1/8” stereo connector into the 1/8” stereo jack on the OAW3-t. 5. Connect the RCA connectors to your receiver's or processor's Pre-Out or Tape-Out jacks (There is no Master Volume control of the OAWA3-r from your receiver when using the Tape-Out jacks—you’ll need to use the 5030- r’s remote control with its IR Receiver cable connected.) -
Page 8: Computer Media Server Connections
Computer/Media Server Connections OAWA3 Wireless Transmitter/Amp-Receiver System Computer/Media Server Connections PC Configurations 1. Select the “Zone” setting you wish to use when transmitting this audio signal. 2. Connect supplied USB cables Mini-USB connector to the OAW3-t. 3. Connect the standard USB connector to an open port on your PC. -
Page 9: Basic Receiver/Amplifier Configuration
Basic Receiver/Amplifier Configuration Instruction Manual Basic Receiver/Amplifier Configuration Left Speaker OAWA3-r Maintain polarity: red to red, black to black Right Speaker... -
Page 10: Initial Setup & Linking Procedure
Initial Setup & Linking Procedure OAWA3 Wireless Transmitter/Amp-Receiver System Initial Setup & Linking Procedure You must configure the OAWA3-r receiver/amplifier to "talk" to the OAW3-t transmitter. After performing the Transmitter Basic Setup on Page 7-8. Follow these simple steps: Step 1 Upon powering the OAW3-t Transmitter, the LED indicator will flash Red/Blue in seeking amplifier link. -
Page 11: Multi-Zone
Examples of Multiple Zones If you wish to use more than one OAWA3-r amplifier/receiver to operate multiple sets of speak- ers with different signals, do the following: 1. Use one OAW3-t connected to the side (5.1) surround out jacks set to Zone 1 2. -
Page 12: Remote Control Operation
Operational Configurations Bi-Amping Use one OAWA3-r Receiver/Amplifier on each speaker to power its LF and HF Sections inde- pendently; see Bi-Amp set-up instruction (pg. 14). Program the Left speaker's amplifier to operate in the “LEFT” mode; see Programming section (pg. 13). Similarly, program the Right speaker's amplifier to operate in the “RIGHT”... -
Page 13: Programming The Amplifier For Advanced Operation
BLUE, then it will return to steady-state BLUE. Step 5 Repeat Steps 1-4 for each OAWA3-r Receiver/Amplifier to be programmed. Remember, only the Receiver/Amplifier to be programmed should be powered at this time. When programming is completed, all Receiver/Amplifiers may be powered on. -
Page 14: Example Of Bi-Amp Configuration
Bi-Amp Configuration OAWA3 Wireless Transmitter/Amp-Receiver System Example of Bi-Amp Configuration Configure the Left speaker's amplifier as "Left" and the Right speakers's amplifier as "Right." Please see Programming Section (pg 13) for instructions Speaker's jumper straps removed. Bi-Amp Terminals Maintain polarity: red... -
Page 15: Troubleshooting
2 x 30 Watts/ch, 1 kHz 8Ω The contents of this manual are Copyright © 2012 by Outlaw Audio, LLC, and may not be duplicated or reproduced by any means, whether physical, electronic or otherwise without prior written consent from Outlaw Audio, LLC. -
Page 16: Outlaw Audio Limited Warranty
• Damage from the performance of repairs by someone not authorized by Outlaw Audio In the event that you wish to return your Outlaw Prod- uct back to us, for any reason, please call to arrange • Any unit on which the serial number has been for a Return Authorization Number.
Need help?
Do you have a question about the OAWA3 and is the answer not in the manual?
Questions and answers