Outlaw 970 Owner's Manual page 21

Connecting Other Video Components to the Model 970
AUDIO CONNECTION NOTE:
When making digital audio connections,
use either the Coaxial or
Optical connection, but not both.
For Coaxial connections, use either
COAX 1, 2 or 3. Likewise, Optical
connections OPT 1-3 are interchangeable.
You will configure the Model 970 later
to use the specific input you have chosen.
VIDEO CONNECTION NOTE:
Your connection requirements will
vary according to your video gear's
capabilities. In most cases, only one
type of video connection is required.
Make sure to use the connections that
correspond to the same video input. For
example, if you connect a component's
composite or S-Video output to the Video 2
inputs on the Model 970, you must also use
the Component Video 2 inputs as well.
If a DVI (or HDMI) output is available,
connect it in place of the component
video outputs.
The Connection Record Chart on page 15
provides an easy way to determine which
video connections are associated with a
particular input.
Video Recording Device
AUDIO
Analog
Digital
PLAY OUT REC IN PLAY OUT REC IN
Coaxial
L
R
Optical
L R
Coaxial Optical
Analog
Digital
AUDIO
(DVD Player, Satellite Receiver, Cable Box, etc.)
Connecting Your Model 970
VIDEO
Composite S-Video
IN
OUT
Y P
B
S-Video Composite Component
VIDEO
Video Device
Model 970 7.1 Channel Preamplifier Processor
Owner's Manual
P
R
DVI Out
1