Model 970 Specifications; Digital Audio - Outlaw 970 Owner's Manual

Model 970 Specifications

Audio Section
Input Impedance
Output Impedance (Main-RCA)
Pre Out
Maximum Output
Volume Range (Main)
Bass Management
High-Pass Slope
(Small Speaker Setting)
Low-Pass Slope (Subwoofer)
Tone Control
Bass Center Frequency/Range
Treble Center Frequency/Range
Frequency Response (Line)
S/N Ratio (IHF-A)
IMD (CCIF @ 15Hz to 1kHz)
FM Tuner Section
Sensitivity
IHF
50dB S/N
S/N Ratio
Mono
Stereo
Distortion
Mono
Stereo
Stereo Separation
Adjacent Channel Selectivity
IF Rejection Ratio
Frequency Response
AM Tuner Section
Sensitivity (20dB S/N)
S/N
Selectivity
Distortion

Digital Audio

All digital audio inputs and outputs are to S/PDIF electrical (75Ω, 0.5Vp-p),
S/PDIF optical (Toslink), or AES / EBU (110Ω, 5Vp-p) standards as appropriate.
Processor
26kΩ
<600Ω
1V
6V
-70dB to +10dB (0.5dB resolution)
Crossover Frequency
(Adjustable 40/60/80/100/120/150Hz)
12 dB/octave (2nd order)
24dB/octave (4th order), 40-150Hz as above
30Hz ± 6dB
10KHz ± 6db
10Hz to 100kHz ± 1dB
101dB
0.09%
10dBµ typ.
13dBµ typ.
70dB
67dB
0.2%
0.3%
40dB typ.
70dB ±400kHz
120dB
20Hz to 15kHz ± 1.5dB
200µV
50dB
25dB
0.7%
CS49400
Video Section
(NTSC Format)
Bandwidth
Composite & S-Video
Component
Input Sensitivity @ 75Ω
Composite & S-Video
Component R-Y Signal
Component B-Y Signal
Component Y Signal
General
Supply Voltage
Power Consumption
Standby Power Off
Idle
@ Full Load
Trigger Output
Dimensions
Width
Height
Depth
Weight
All features and specifications are subject to change without notice or liability to upgrade
existing units.
Outlaw Audio and the Outlaw Audio logo are registered trademarks of Outlaw Audio, LLC.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are
registered trademarks of Dolby Laboratories.
Manufactured under license from DTS, Inc. DTS, DTS-ES, DTS 96/24 and DTS Neo:6 are registered
trademarks of DTS, Inc.
Any trademark not acknowledged is recognized as the property of the respective owner.
Model 970 7.1 Channel Preamplifier Processor
Owner's Manual
Model 970 Specifications
6 MHz –3dB
>100MHz
1.0Vp-p
0.5Vp-p
0.5Vp-p
1.0Vp-p
120V, 60Hz only
1.9W
6W
45W max.
Sequential Delay 50 mA @ 12 VDC
17.2 inches / 436.9 mm
5.9 inches / 149.7 mm
15.5 inches / 393.7 mm
20 lbs. / 18.1 kg
7