Siemens multiranger 100 Quick Start Manual page 3

MultiRanger Quick Start Manual
The MultiRanger is a versatile and dependable level-monitoring instrument using advanced ultrasonic
techniques. The MultiRanger is available in two models, MultiRanger 100 and MultiRanger 200, and is
designed for a variety of applications:
• water and wastewater
• storage tanks, for measuring liquids, slurries, and solids
• hoppers, ore bunkers, flotation cells
MultiRanger 100
The MultiRanger 100 is a single or dual-point level, one, three, or six relay measurement device. It is
equipped with digital communications and offers the latest in echo processing technology and diagnostic
features.
MultiRanger 200
The MultiRanger 200 is a single or dual-point, three or six relay device that offers both level and volume
measurement. It has Open Channel Monitoring capabilities, a larger number of advanced pump control
algorithms, and is equipped with digital communications. It offers the latest in echo processing technology
and diagnostic features.
Notes:
• This product is intended for use in industrial areas. Operation of this equipment in a residential area
may cause interference to several frequency based communications.
• The MultiRanger is to be used only in the manner outlined in this manual, otherwise protection
provided by the equipment may be impaired.
This manual outlines the essential features and functions that apply to the MultiRanger 100 and the
MultiRanger 200. Features that apply to the MultiRanger 200 are clearly marked.
We strongly advise you to acquire the detailed version of the manual so you can use your device to its
fullest potential. The complete manual is available on our Web site:
www.siemens.com/processautomation.
The printed manual is available from your local Siemens Milltronics representative.
Questions about the contents of this manual can be directed to:
Siemens Milltronics Process Instruments Inc.
1954 Technology Drive, P .O. Box 4225
Peterborough, Ontario, Canada, K9J 7B1
Email: techpubs.smpi@siemens.com
Copyright Siemens Milltronics
Process Instruments Inc. 2002.
All Rights Reserved
We encourage users to purchase authorized
bound manuals, or to view electronic
versions as designed and authored by
Siemens Milltronics Process Instruments Inc.
Siemens Milltronics Process Instruments Inc.
will not be responsible for the contents of
partial or whole reproductions of either
bound or electronic versions.
MILLTRONICS®is a registered trademark of Siemens Milltronics Process Instruments Inc.
7ML19985QD83
While we have verified the contents of this manual for
agreement with the instrumentation described,
variations remain possible. Thus we cannot guarantee
full agreement. The contents of this manual are regularly
reviewed and corrections are included in subsequent
editions. We welcome all suggestions for improvement.
Technical data subject to change.
MultiRanger – QUICK START MANUAL
Disclaimer of Liability
Page EN-1