Removing The Processor Airflow Shroud - Dell XPS 710 Owner's Manual

1 power cable
9. Check all cable connections and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.
10. Replace the drive panel (see
11. Replace the computer cover (see
NOTICE: To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer.
12. Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
13. Enter system setup (see Entering System
Processor Airflow Shroud
CAUTION: Before you perform this procedure, follow the safety instructions located in the Product Information Guide.

Removing the Processor Airflow Shroud

1. Follow the procedures in Before You
2. Remove the computer cover (see
CAUTION: The processor heat sink can get very hot during normal operation. Be sure that the heat sink has had sufficient time to cool before you
touch it.
3. Loose the two captive screws on the processor airflow shroud, and then rotate the shroud back, away from the fan.
2 data cable
Replacing the Drive Panel).
Replacing the Computer Cover).
Setup) and select the appropriate Drive option.
Begin.
Removing the Computer Cover).