Installing A Cd/Dvd Drive - Dell XPS 710 Owner's Manual

8. Connect the computer and devices to electrical outlets, and turn them on.

Installing a CD/DVD Drive

1. Follow the procedures in Before You
2. Remove the computer cover (see
3. Remove the drive panel (see
4. Remove the existing CD/DVD drive, if applicable (see
5. Prepare the CD/DVD drive for installation and check the documentation that accompanied the drive to verify that the drive is configured for your
computer.
NOTE: If you are installing an IDE drive, configure the drive for the cable select setting.
6. If no screws are attached to the drive, check the inside of the drive panel for screws and, if screws are present, attach the screws to the new drive.
1 CD/DVD drive
7. Gently slide the drive into the drive bay until you hear a click or feel the drive securely installed.
1 drive release latch
8. Attach the power and data cables to the CD/DVD drive.
To locate the system board connector, see
Begin.
Removing the Computer Cover).
Removing the Drive Panel).
Removing a CD/DVD
2 shoulder screws (3)
2 CD/DVD drive
System Board Components.
Drive).