Removing The Drive Panel - Dell XPS 710 Owner's Manual

1 power cable
9. Replace the computer cover (see
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
10. Connect the computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
Drive Panel
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

Removing the Drive Panel

1. Follow the procedures in Before You
2. Remove the computer cover (see
3. Grasp the drive release latch and slide it towards the base of the computer until the drive panel snaps open.
1 drive release latch
4. Pivot the drive panel outward and lift it from its side hinges.
2 data cable
Replacing the Computer Cover).
Begin.
Removing the Computer Cover).
2 drive panel 3 drive panel tabs