Programming; The "Bartender" Menu; Selecting The Display Language - Rancilio classe 10 Technical Manual

4. PROGRAMMING

Programming is carried out on two levels, namely:
"Bartender" programming
"Technician" programming
4.1

The "Bartender" Menu

When the "+" and " – "buttons are pressed for appro-
ximately 2 seconds, the "bartender" programming
menu is activated. This menu contains the following
submenus:
To move from one submenu to another, press "+" or
"-". To enter in a submenu, press "enter", while to
RESET
quit, press "esc".
BEEP
RIGENER.
SUI TASTI
When you enter a submenu, the display flashes the
RESINE
editable value. To make changes, use the "+" or "-"
buttons.
LANGUAGE
SELECTION
4.1.1

Selecting the Display Language

This menu allows you to select the language to be
used to show and messages on the display. You can
select among the following languages:
Italian, English, Spanish, French, German and Por-
tuguese.
LANGUAGE
SELECTION
ITALIANO
ENGLISH
ESPANOL
FRANCAIS
DEUTSCH
SET TIMER
OROLOGIO
REGENERATION
BEEP
RESET
SELEZIONE
REGENERATION
LINGUA
RESET
ITALIANO
ENGLISH
ESPANOL
FRANCAIS
DEUTSCH
PORTUGUES
- Language selection
- Softener regeneration
- Beep
- Clock
- Set clock
- Date-time format
- Set timer
- Automatic switching ON
- Selection counts
- Coffee group 1
- Coffee group 2
- Coffee group 3
- Coffee group 4
- Water group
- TSC group
- Counter total
- Reset counters
If you make changes, these must be confirmed by
pressing "enter" until you quit the submenu. If you do
not wish to save your changes, press "esc".
CONTATORI
PARZIALI
CLOCK
RESET
BEEP
RIGENER.
SUI TASTI
BEEP
CLOCK
RESINE
SELECTION
SET TIMER
COUNTER
SET TIMER
OROLOGIO
SELECTION
SET TIMER
COUNTER
CONTATORI
PARZIALI
43