Replacing The Internal Card With Bluetooth Wireless Technology - Dell XPS M2010 Service Manual

Back to Contents Page
Internal Card With Bluetooth Wireless Technology
Dell™ XPS™ M2010 Service Manual
Removing the Internal Card with Bluetooth Wireless Technology

Replacing the Internal Card with Bluetooth Wireless Technology

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body
before you touch any of your computer's electronic components. You can do so by touching an unpainted metal
surface. If you leave the area, ground yourself again when you return to the computer.
Removing the Internal Card with Bluetooth Wireless Technology
NOTICE: To help prevent damage to the system board, remove the main battery before working inside the computer.
1. Follow the instructions in
2. With the computer still turned over, remove the subwoofer cover (see
3. The internal card with Bluetooth wireless technology is adhered to the subwoofer. To remove the card, pry it off the
subwoofer, and disconnect the cable attached to the card.
1 subwoofer 2 internal card with Bluetooth wireless
technology
Replacing the Internal Card with Bluetooth Wireless Technology
NOTE: The internal card with Bluetooth wireless technology is adhered to the subwoofer. To replace the card, you will
need to pry it from the subwoofer and adhere a new card.
1. Connect the cable to the new internal card with Bluetooth wireless technology.
Before Working Inside Your Computer, including removing the system battery.
Removing the
3 cable connected to the internal
card
Subwoofer).