Dell XPS M2010 Service Manual page 42

Back to Contents Page
Wireless USB Board
Dell™ XPS™ M2010 Service Manual
Removing the Wireless USB Board
Replacing the Wireless USB Board
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
CAUTION: Only products approved for use in your portable computer may be installed.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body
before you touch any of your computer's electronic components. You can do so by touching an unpainted metal
surface. If you leave the area, ground yourself again when you return to the computer.
The wireless USB board provides the wireless connection for the remote controller.
Removing the Wireless USB Board
NOTICE: To help prevent damage to the system board, remove the main battery before working inside the computer.
1. Follow the instructions in
2. Turn the computer over and open the display (see
3. Detach the keyboard by grasping the sides of the keyboard and pulling it straight out from the computer base. Set the
keyboard aside.
4. Remove the cosmetic covers (see
5. Remove the top cover (see
6. Disconnect the wireless USB cable from the system board.
7. Remove the wireless USB board by removing the M2 x 3-mm screw.
1 wireless USB cable connector
Before Working Inside Your
Removing the Cosmetic
Removing the Top Cover).
2 M2 x 3-mm screw
Computer, including removing the system battery.
Opening the Display).
Covers).
3 wireless USB board