1 Inspect the media card to determine the proper orientation for insertion.
2 Slide the media card into the appropriate slot of the media card reader
until it is completely seated in the connector.
3 If you encounter resistance, remove the card, check for proper
orientation, and then try again.
Instructions for Setting Up a Device With Bluetooth Wireless
Technology
1 Turn on the device.
2 Press the connect button on the device.
The Bluetooth LED on the device blinks, indicating that the device is
active and can be detected by the computer.
3 Press the connect button on the front of the media card reader.
4 The Bluetooth LED on the device stops blinking and stays on for a few
moments indicating that the connection between the device and the
computer has been established. The LED then turns off.
66
Using Multimedia